|

How To Clean SeaDek

SeaDek is a cell EVA foam that creates a non-slip surface. Because of this, it is frequently used on boats. SeaDek, on the other hand, has the potential to grow discolored and grimy with time. It is essential to clean your SeaDek on a consistent basis if you want it to retain its pristine appearance.

This blog post will walk you through the most effective method for cleaning your SeaDek and will also provide some useful advice for keeping it looking like new for as long as possible. So keep reading!

How to Clean your SeaDek

What Will you Need

  • A brush
  • Mild soap
  • Water
  • A power washer (optional)

Mineral spirits, hull cleanser, bleach that has not been mixed with water, and acetone are all substances that should not be used.

Step 1: Brush the Loosened Dirt

To get started, take a brush with softer bristles and brush the top surface of your SeaDek. This stage in the preparation process will assist in removing any dirt or debris that may be present on the surface.

You can also use a power washer, if you have one, to remove any stains that are particularly stubborn. Be careful not to apply too much pressure to the SeaDek, as doing so may cause it to get damaged.

Step 2: Wash the Seadek

When you have finished brushing the surface, it is time to clean it with some soap and water. The use of dish soap and water is the most effective method for cleaning SeaDek.

  • In a bucket, combine your gentle dish soap with water to create soapy water.
  • After that, take a sponge or a brush and scrub the surface of the SeaDek in a circular motion to remove all of the debris from the component.

It’s possible that you’ll need to use a more powerful cleaning if your SeaDek has very stubborn stains or grime on it. In this particular scenario, we suggest making use of a product that is known as Starbrite SeaDek Cleaner. This product, which is specifically intended to clean SeaDek surfaces and can be bought in most maritime stores, is available for purchase.

  • Just make sure that you pay close attention to the instructions that are printed on the bottle, since failure to do so may result in harm to your SeaDek.
  • After that, use a sponge or a rag to scrub the SeaDek with soapy water until it is clean. Make sure that you explore every corner and cranny of the area.
  • When you are finished, it is imperative that you thoroughly rinse away all trace of soap.

Step 3: Apply Sealant

After you have finished cleaning your SeaDek, it is critical to treat it so that it is protected from the weather. It is recommended that you use a sealer on your SeaDek approximately once every few months. Sealant will help protect it from the weather, allowing it to maintain its “new” appearance for a longer period of time.

It is highly recommended that you use a product called Starbrite SeaDek Protector, which helps to keep your SeaDek looking new and protects it from damage caused by UV rays. Be sure to use it frequently and in accordance with the instructions on the bottle.

How to Clean the Suntan Lotion on Seadek

When you apply sunblock to your skin and inadvertently get some on your SeaDek, it can be really unpleasant and eventually stick to the surface. In such a scenario, an all-purpose cleaner may be of assistance.

  • A few drops of the multi-purpose cleaner should be poured onto the lotion stains.
  • Make use of the bristle brush for the boat and some warm water to rub on the stains.
  • In the event that the marks are still discernible after rinsing the SeaDek with clean water and proceeding with the operation,

How to Clean Rust Stains out of SeaDek?

A rust stain is yet another irritating and difficult to remove dirt that frequently appears on SeaDek. To get rid of the stains, you can choose to clean the fiberglass hull and bottom with oxalic acid, use vinegar, or utilize fiberglass cleaning.

  • The rust stains will benefit from the application of the specified cleaning chemical. You should give the cleaner roughly five minutes to work before removing it.
  • After that, protect your hands with gloves made of rubber and apply the solution onto the spots in a circular motion.
  • After that, rinse the SeaDek with clean water to remove the grime and cleanser that was on it.

How to Remove Fish Blood from SeaDek?

Some boat owners simply cannot steer clear of the possibility of getting fish blood stains on their SeaDek by accident. And worse, it smells. Because of this, we are going to have to clean our yacht with bleach in order to get rid of the odor.

  • Whether you choose to use a ratio of 1:1 or 1:2 when mixing the bleach and cold water, the important thing is to ensure that the resulting cleaning solution is not overly potent. After that, rub it into the areas that are stained with blood.
  • Cleaner should be worked onto the SeaDek surface using a soft brush that has been dipped in water and then used. Continue doing so until the stains can no longer be seen.
  • Now that you’ve finished, give the SeaDek a final rinse with some fresh water.

Tips on Cleaning SeaDek

  • Before cleaning your SeaDek, make sure to treat and remove all filth that has the potential to leave stains by following these steps:
  • If you are going to use a powerful cleaner, you should always perform a spot test first to ensure that it will not ruin the surface you are cleaning.
  • In order to keep your SeaDek from becoming discolored, always be sure to clean up any spills as soon as they happen.
  • When not in use, make sure to keep your SeaDek in a dry location. Mold and mildew are less likely to develop if this is done regularly.

How to Clean SeaDek Flooring

The SeaDek flooring is simple to maintain and can be cleaned using any one of a number of different approaches.

  • Simply use a moist cloth to wash the surface off when you need to do some basic cleaning.
  • Either a solution of vinegar and water or a boat cleaner specifically designed for use on boats can be used to provide a more thorough cleaning. When using any kind of cleaner, you need to be sure that you carefully follow the directions that the manufacturer provides.
  • Always use a brush with soft bristles when scrubbing the floor to remove dirt and stains to prevent the floor from becoming damaged.
  • Never use bristles made of metal because they have the potential to scratch the surface.
  • It is best to avoid putting harsh chemicals or solvents on the flooring, since these can potentially cause harm to the surface.
  • Finally, after cleaning the area, you need to be sure to properly rinse it to remove any and all residues of the cleaner. When the flooring is completely dry, you may then add a protectant to it so that it will continue to have the appearance of being brand new.

What is the best way to clean seadek?

You have just returned from an incredible day on the water, and everyone was in awe of your brand-new SeaDek gear. However, it is now time to clean up, and all of the fun that was had during the day has left a significant mess on deck. You are probably thinking at this point, what is the most effective approach for me to clean my new SeaDek kit?

Because of its closed-cell nature, SeaDek is non-absorbent and inherently stain-resistant, which means that dirt and grime stay on the surface rather than being absorbed into the material. This makes cleaning SeaDek significantly easier than cleaning other flooring materials such as carpet.

Reach for Dek Magic, a cleaner that has been specifically created for the purpose of cleaning PE/EVA foam decking. This cleaner makes it easy to remove the majority of typical stains and spills, in addition to providing general cleaning. Simply apply Dek Magic to the parts that need to be cleaned, scrub it in with a boat brush with medium bristles, let it set for three to five minutes, and then rinse it off. Dek Magic is excellent for removing particularly tough stains from substances such as oil, blood, and wine, and it is also safe for most other boat surfaces, including vinyl and PVC.

SeaDek can also be cleaned with a wide variety of common household cleansers, in the event that Dek Magic is unavailable.

Use an all-purpose cleaner, degreaser, or dish soap in conjunction with warm water and a brush with medium bristles to remove dirt, footprints, and other types of grime from your SeaDek surface. Work the soapy mixture into the SeaDek very thoroughly until dirt and other debris start to come up. Repeat the process with fresh, clean water if it’s required.

Make a bleach solution by adding one cup of bleach to one gallon of water. This will help remove stains that are difficult to remove. Scrub the affected area using a brush with gentle bristles and a circular motion until the stain is removed. Repeat the process with fresh water if it’s required. Rinse everything completely.

Sometimes ugly rust stains might be left behind by anchor rode or hardware that is not stainless steel. Vinegar or oxalic acid in the amount of one full cap should be used for this purpose. After applying it, leave it on the rust stain to soak for three to five minutes. If you feel it’s essential, put on gloves made of latex or nitrile and massage the cleaning into the surface of the SeaDek pad. Repeat the process of rinsing with water if it is required. When using oxalic acid, you need to be careful not to get any of the acid on the borders of the pad, since this could cause the lamination or PSA to become damaged.

After a day spent on the water, one of the simplest methods to clean your SeaDek is with the assistance of a light-duty pressure washer that has a low PSI (this kind of pressure washer is comparable to the one used in car washes). Watch as the evidence of a fishing expedition is rapidly removed by making use of a wide-angle tip and taking care to maintain an appropriate distance from the material in order to prevent damage. It is important to note that while pressure washing is an excellent way to maintain your SeaDek looking new, extreme caution is required to avoid damaging the product in any manner.

Even though SeaDek is simple to clean, you may make the task significantly less laborious by addressing any messes, leaks, or spills as soon as they occur.

Similar Posts