How To Clean Cotton Candy Machine?

It has been a long day working on the candy production, but it is finally time to put away the machine. It goes without saying that you won’t keep it in the same place as all of that clutter, do you? You have to start by cleaning it.

But you have no idea how to keep a cotton candy machine clean, have you? Don’t be concerned. You may rely on us to provide assistance.

To manufacture cotton candy or candy floss with your very own cotton candy maker is, without a doubt, one of the best ways to have a good time and fill your heart with happiness. The machine uses high speeds to spin the candy, which results in the candy being transformed into strands that are thin and loosely packed.

When the sweet is loaded into the machine and the “start” button is pressed, the sugar is melted and then forced through a series of tiny holes. During the process, the sugar is transformed back into a solid state, but this time it takes the shape of strands that are much thinner. When placed in the mouth, the buoyant strands quickly disintegrate into huge amounts of sweetness. Since the buoyant strands are actually made up of the vast majority of air, they are easily able to be squeezed into lumps.

If you want to ensure the longevity of your floss or cotton candy production machine, then regular maintenance is an absolute necessity. The correct cleaning of your device is one of the ways that it may be maintained, and that is the topic that I will focus on in this post.

Cotton Candy Machine Instructions

The Gold Medal Econo Floss Cotton Candy Machine can produce three to four servings every minute, which is equivalent to around one hundred ounces of sugar for cotton candy in an hour. The machine has dimensions of 22 inches by 16 inches by 18 inches, and it weighs 49 pounds. The Econo Floss Cotton Candy Machine comes equipped with a standard connector that has three prongs and requires a plug that is 110 volts and 15 amps.

Cones and floss sugar are both available for purchase from our company. Regarding price information, kindly go to the Concession & Party Machines Page.

The Gold Medal Econo Floss Cotton Candy Machine is simple to use and operates in a straightforward manner. Before using the machine, please ensure that you have read and understood the operating instructions, and then, before returning it, ensure that you have followed the cleaning instructions.

Instructions on How to Operate the Cotton Candy Machine
Danny Thomas Party Rentals would want to express their gratitude to you for renting the Gold Medal Econo Floss Cotton Candy Machine. To prepare delectable cotton candy for your occasion, just follow the instructions that are provided below. Please do not be reluctant to get in touch with us at this number (408) 727-2424 if you have any concerns or queries. We really hope you have a good time using the Cotton Candy Machine!

  1. Kindly ensure that the cotton candy machine stays in the upright position at all times.
  2. Under NO circumstances may the machine be lifted by the head that spins it. Always grab the handles with your hands.
  3. ALWAYS USE THE FLOSS BUBBLE, As a matter of safety and caution, you should always use the floss bubble. The rotating floss head goes at a speed of 3,450 revolutions per minute, which is an extremely high speed. The operator must keep their hands and face away from the floss head at all times. To prevent injury, spectators must maintain a safe distance from the action.
  4. Under NO circumstances should floss sugar be added while the motor is running. Before adding sugar, the machine should always be turned off.
  5. Make sure you always use the floss sugar that we supply. Alternate sugars have the potential to erode the heating element.

Before Plugging in the Machine:

  1. To lower the shipment bracket, unscrew the two knobs that are located on either side of the cabinet top and then push them down. If this step is skipped, the machine won’t function properly.
  2. Check to see that the floss ribbon that serves as the heating element and is positioned inside the head assembly has not been dislodged from the band while it was being transported. If the ribbon has been detached from the band, you will need to manually reattach it.
  3. Put the machine down on a table that is completely level. Put the huge bowl made of aluminum on the base of the machine. There are no fasteners, as the bowl simply rests on top of the machine.
  4. Attach the stabilizer to the inside of the bowl using the clips that are provided (doing so will make it possible for the sugar to get caught on the mesh screen).
  5. Put the protective plastic bubble that protects the floss on top of the dish.
  6. Make sure that both of the switches that are located on the front of the machine are turned off.
  7. Connect the cord to the machine.
See also  how to clean puffco peak pro atomizer

Operating the Machine:

  1. Filling the floss head should be done with the main switch OFF. Always fill it up to within 90% of its capacity with floss sugar. It is required to have this quantity in order to achieve a state of equilibrium in the floss head. DO NOT OVERFILL! If the container is too full, there will be an excessive amount of vibration. Before you switch on the electricity, you need to manually turn the head so that the sugar is evenly distributed. Because of this, there will be a significant reduction in head vibration.
  2. It is imperative that the machine be turned off before any additional sugar is added.
  3. Make sure that the MAIN SWITCH and the HEAT SWITCH are both “ON.”
  4. To start the heating process as quickly as possible, turn the control knob counterclockwise until it reaches its highest level.
  5. It shouldn’t take more than a few seconds for the machine to begin producing floss. When the machine begins to produce floss, you must adjust the heat setting so that it is lower.
  6. To stop the appliance from smoking, rotate the knob controlling the heat counterclockwise until it reaches the operating position. You will “carbonize” the ribbon (heat element) if you operate the unit while it is set to the “start up” mode. Under no circumstances should you ever run machinery for an extended period of time with the HEAT CONTROL set to a position that may cause the sugar to smoke. Because of this, an excessive amount of carbonization of the ribbon (heat element) will occur. Turn down the heat if you detect the fragrance of sugar burning or see smoke.

Making Floss:

  1. Keep your hands away from your head while it spins!
  2. Choose a cone, and if it won’t slide out of the stack of cones, twist it free with your hand.
  3. Keep a couple of inches of the pointed end of the cone held between two of your fingers and one of your thumbs. Roll the cone around in the web of floss that is forming in the pan using a light flicking motion. Raise the cone, which should still have the ring of floss attached to it, and rotate it to wind the floss around the cone. NEVER attempt to roll floss with the cone still inside the pan. This will result in the floss being packed in too tightly.
  4. In the event that the floss does not adhere to the cone, move the cone closer to the head of the spinner in order to get a “starter” of melted sugar. The cone should be lifted out of the pan, and then the floss should be wrapped around it using a “figure eight” motion with the hand. This results in the formation of enormous pockets and gives the impression that the finished product is larger.
  5. Be sure that the humidity level in the room is not too high; otherwise, the product will be “heavy.”
  6. Whenever the bowl is used, the floss will accumulate on the mesh stabilizer that is located inside. If the floss starts to collect “low” on the netting, twist the front (leading) edge of the leather floaters so that it points downward. You will have greater lift, and the floss will accumulate at a higher level.
See also  How To Clean Opal Ice Maker?

Why You Need to Clean the Cotton Candy Maker Regularly?

  1. A candy maker is an electronic device, and just like any other kind of device, it requires regular upkeep.
  2. Additionally, as the machine is used normally, sugar crusts will form on the various elements of the machine. If they are not cleaned on a regular basis, the bowl, splash guard, and spinner will become increasingly dirty.
  3. The crusts that have developed over time limit the efficiency of the various sections of the candy maker by obstructing them and clogging the minute holes in the apparatus. In addition to that, the circumstance may result in a malfunction of the equipment.
  4. Another concern that may arise when using a machine that is not kept clean is a steady decline in the quality of the floss that is produced.
  5. If you maintain a regular cleaning schedule for the device, you can avoid dirt from building up over time and causing the aforementioned issues.
  6. Cleaning the equipment on a regular basis will help to maintain its proper functioning. This ensures that the floss that is produced continues to be of a high quality, and that its flavor is not diminished by the presence of stale sugar. Additionally, it prevents the item from breaking down prematurely, which makes it last longer.

Step by Step Guideline on How to Clean a Cotton Candy Machine

There are two distinct approaches to the cleaning process. The first approach is the general/quick cleaning method, and the second approach, which is the more involved part-by-part procedure, is described below.

1. Quick Cleaning Process Of Candy Maker

Step 1 : Take the bowl off the table and wash it in some warm water. You don’t need detergent, water is adequate. The next step is to operate the machine as if you were creating sweets. This is done to get rid of any leftovers and to make sure that all of the sugar has been consumed. By carrying out these steps, you will eliminate any possibility of sugar remaining on the head of the floss.

Step 2 : Adjust the temperature so that it is at its maximum possible setting and keep it there for approximately one minute. Because of the high temperature, any sugar that could still be present will be baked away.

Step 3 : When there are no more food items that can be seen inside the machine, the carbon should be removed from the ribbons. To accomplish this, you must first set the appliance to its highest heat setting and leave it there for one minute.

The next step is to fetch some water in a cup, and then slowly pour the water into the bowl of the hot device. This will remove any sugar crystals that may have been clinging to it prior to doing so. You will notice that the machine is producing steam when you gradually add the water to it while it is operating.

Continue repeating this for about a minute and a half, and then after that, let the machine run for an additional 30 seconds without putting any water in it.

Step 4 : Remove the machine from the power source and let it to cool down on its own.

Step 5 : After the device has cooled down, use a dry cloth to remove any moisture that may still be present from the bowl and the floss head. It is possible that sugar will be left on the splashguard or bubble; therefore, you should clean them as well.

2. Candy Machine Part by Part Cleaning Tips

You’ve probably already finished giving the machine a thorough cleaning at this point. When performing routine cleaning, this is typically sufficient, but every once in a while, you will need to take it a step further and clean each component on its own.

See also  How To Clean Tangle Teezer Easily

You will need to take the machine apart in order to accomplish that.

Step 1 – disassembly

Simply take hold of the splashguard at its highest position, twist it to disengage it from the latches, and then lift the unit to remove the splashguard.

The stator is the following component to be taken off. The majority of the time, this will have screws all around it that attach it to the chassis. These screws can be readily removed with a screwdriver. You may remove the sugar from the screwdriver slots even if they are blocked with sugar by just running the screwdriver through the slots.

As soon as the stator has been removed, it is time to take the spinner off. When used for extended periods of time, the spinner’s cap, which is attached to the very top of the device, may become stuck to the band. After removing the screws, you will need to remove the spinner cap by giving it a light tap with an item made of plastic or rubber.

In order to remove the spinner from the machine, you will either need a screwdriver or a wrench depending on the construction of the device. In most cases, the spinner will have either a central bolt that goes all the way through it or screws that are located on the side. They should be simple to remove if you have the appropriate instrument. Be very certain that the machine is cut off from its source of power before you begin removing any of its components.

Step 2 – washing the parts

Warm some water and soak the bowl, the stator, and the spinning cap for about a minute. They will no longer have any sugar crystals on them after doing this. After that, give them a good scrub. To reiterate, detergent is not required; all that is needed is water.

Step 3 – cleaning the motor base

It is an electronic component of the motor base, and hence washing it in water is not a good idea. To clean the base of the motor, all you need to do is acquire a fresh cloth, wet it, and then use it.

Cotton Candy Machine Maintenance Tips

You should prioritize cleanliness above all other aspects of the maintenance work that you carry out. When you clean your equipment on a regular basis, you preserve it in good working condition and ensure that it will endure for as long as possible.

In addition to this issue, another common problem that consumers have is that the system does not respond when the power is turned on. In the event that this occurs, try the following solutions:

  • Check the wiring – ensure all the wires are connected tightly.
  • Check the fuse – It’s possible that the fuse has been blown. Remove the screw to make sure that it hasn’t come loose.
  • Examine the motor to ensure that it is not jammed; if it is, spray it with WD-40 or any other suitable lubricant to get it moving again. After allowing the motor to soak, you should spin it manually before turning the device back on.

Similar Posts