|

How to Clean a Pax 2 – Cleaning Tips

When you inhale through your PAX 2, do you hear a noise similar to gurgling?Are you tasting the resins, which are harsh, rather than the terpenes, which are sweet, in your dried herb?If the answer is true, then all you have to do is clean your unit.

It’s true that the PAX 2 isn’t the most recent model of vaporizer that PAX Labs has released, but it still has a lot of life left in it, and many people continue to consider it to be their favorite vape from the company. The PAX 2 has many of the same features as its older sibling, the PAX 3, including a vapor tube that is more difficult to clean because of its narrow diameter.

This feature isn’t particularly useful, but it doesn’t make it any simpler to clean your PAX vape. So in order to make it easier for you to quickly and effectively clean your PAX 2 vaporizer, we have listed all of our favorite pro tips and tricks!

Cleaning the Pax 2: What you need

  • Isopropyl alcohol
  • A few cotton swabs
  • Narrow pipe cleaners or cleaning brush
  • The PAX mouthpiece lubricant

Preparing the Pax 2 for Cleaning

Before beginning to clean your PAX 2 unit, you should first gather all of the PAX 2 cleaning supplies that were listed above, arrange your work area (ideally, a tabletop or desktop), and then begin disassembling your PAX 2 unit.

Because you will already have all of your cleaning tools, you should take advantage of this chance to clean all of the accessories that come with your PAX 2 as well as any other units or vape equipment that you would like to clean. Doing so will save you a lot of time and effort in the long run.

  • Take off the round mouthpiece and the top of the oven on your PAX 2. You can remove the screen by carefully threading a pipe cleaner through the vapor tube in a steady circular motion.
  • Take the lid off of your device, and then remove any other components, such as a chamber filler or other similar components, that may be inside the chamber.
  • Carefully disassemble any additional attachments that you will be cleaning in order to expose every component of the parts that need to be cleaned.

You might have some additional lids, a cover for a half-pack, an insert for a concentrate, and/or some additional screens. Gather those as well, as you will want to clean all of them at the same time in order to save time.

Cleaning your Pax 2 and Accessories Piece by Piece

Before beginning to clean your PAX 2 unit, you should first gather all of the PAX 2 cleaning supplies that were listed above, arrange your work area (ideally, a tabletop or desktop), and then begin disassembling your PAX 2 unit.

To begin, locate your bottle of isopropyl alcohol and pour a portion of it into a bowl or a cup. Because this is where you will be soaking the pieces to remove all of the resin, it is best to use a bowl that is not made of plastic because plastic soaks up a lot of the oils and aromas that are present in the resin.

You can also use strong alcohol that can be consumed, like as Everclear or Vodka, rather than isopropyl alcohol if you want to reclaim the resin that you receive from the clean for use in a future cannabis tincture. This is something that you can do if you want to.

Cleaning the Pax 2 Body

  • If you want to clean the body of your PAX 2, you can use a soft cloth that has been dampened with a tiny bit of alcohol to wipe it down. You could also use a disinfecting wipe, though scentless wipes are what we would prefer.
  • After the initial cleaning, you should go back in for a second round and rub the PAX 2 with another damp cotton swab in order to dislodge the resins and any herb residue that may still be there.

After cleaning, you shouldn’t be concerned if the metal on the inside of the oven still has some stains on it. Although it may not be feasible to restore the metal to its previous appearance, the oven’s functionality has not been negatively impacted by the staining. Simply using this fantastic vape on a consistent basis is a demonstration of how much you enjoy using it.

Cleaning the Vapor Path

If you’ve been using your PAX 2 for some time, the condensed vapor and resins inside the device’s vapor tube have probably left behind a sticky coating. This coating can be removed off the tube by soaking a pipe cleaner in isopropyl alcohol and then dragging it along the length of the tube in a zigzag pattern. If the vaporizer has a particularly stubborn buildup of gunk, you might want more than one pipe cleaner to get it clean.

When a pipe cleaner does not leave any residue behind and it is possible to see through the vapor tube, you are finished.

Cleaning the Separate Pieces

In this phase, all you need to do is immerse all of the soakable PAX 2 pieces and accessories in the bowl of isopropyl glycol for about half an hour, giving the bowl a light toss or shake around once every ten minutes or so.

This preliminary soaking will cause the majority of the resin to just melt off of all of the pieces, and it will make any of the difficult-to-remove resin places significantly easier to clean! After the allotted time for soaking has passed, all that is required of you is to go over the pieces with a pipe cleaner, brush, or cotton swab and ensure that you remove all of the remaining residue off the pieces.

      • Cotton swabs that have been dipped in isopropyl alcohol can be used to clean the mouthpiece and the oven screen. The oven door should not be cleaned in this manner. (Before you use the cotton swabs to clean, squeeze any extra alcohol out of them, since you want to use the least amount of liquid possible in the cleaning process).

What to do before Vaping the Pax 2 again

Feel around the edge of the PAX 2 mouthpiece and ask yourself if it has a dry and sticky feel to it before you replace the mouthpiece. If you answered yes, then place a few drops of PAX mouthpiece lubricant on the outer border of the mouthpiece.

After that, apply the lubricant all around the mouthpiece so that it is distributed evenly. After that, you merely need to click in and out about ten times to ensure that the lubricant is distributed throughout the entire assembly. Because the mouthpiece also functions as a control button for the PAX 2, it is imperative that you lubricate it on a regular basis to prevent it from being jammed.

In order to finish the cleaning procedure of your PAX 2 vaporizer, you need to do the following:

  • Start up your PAX 2 and adjust the temperature of your heating path.
  • Wait for the vaporizer to finish heating up without loading it with any dried herb, but refrain from inhaling vapor from the device during this time.
  • There is a possibility that you will smell alcohol coming from it. This is normal since you are getting rid of any remaining alcohol, which you do not want to mix in with your session of vaping dry weed.
  • After the session is done, you shouldn’t be able to detect any traces of alcohol in either your smell or your taste. For additional information, take a look at our Pax 2 Review.

How often should you clean the Pax 2?

You may be wondering, now that your Pax 2 vape has been cleaned, how frequently you need clean your vaporizer in the future. If you vape on a daily basis, we recommend that you clean your vaporizer at least once every two to three times that it is used.

Overall, we will advise that you should complete a full cleaning of your vaporizer at least once every six to ten sessions in order to maintain the greatest and safest user experience possible. The shorter the period between cleans, the more efficient your subsequent cleaning sessions will be, and the more positive your entire experience will be!

How to Clean a Pax 2

How should a Pax 2 be cleaned? It is recommended that you clean your PAX 2 with isopropyl glycol for the best results. You need to let the components of the puzzle sit in the solution for half an hour. Because of this, they will be much simpler to clean. You can clean the device by using a cotton swab or a pipe cleaner to remove any debris or grime that may have accumulated on it. After cleaning it, the best way to dry it is by letting it air dry. Additionally, you need to make an effort to maintain the plastic components of the device clean.

It is necessary to remove the mouthpiece, screen, and oven lid from your PAX 2 before cleaning it. After that, you can scrub the gadget with some isopropyl alcohol using a pipe cleaner that has been dipped in the alcohol. Do not give in to the temptation to use the pipe cleaner more than once because it is possible that this step will need to be repeated multiple times. Having said that, the vapor tube needs to be spotless and transparent. After that, you should wipe down the gadget to eliminate any residue that may have been left behind.

It is recommended that you wipe the vapor tube of the Pax 2 with alcohol. Both the mouthpiece and the oven lid are detachable, allowing for easy cleaning with a damp cloth. After that, you should clean the vapor pathway with a pipe cleaner that has been dipped in isopropyl alcohol. To prevent further harm, perform this procedure as many times as required. In order to ensure that the item has been fully cleaned, you should also wipe it down using a towel made of microfiber. If you’ve been vaping for a while, you’ll find this to be a very helpful tip.

Before utilizing a PAX2 for the first time, you need to make sure that it has been fully charged. Put it on the charger and wait until all of the petals have stopped vibrating before removing it. To turn the device on, press the power button that is situated in the middle of the mouthpiece. You should be able to see the temperature mode as well as the color of the mouthpiece displayed on the screen. After that, you need to remove the mouthpiece from the pipe and replace it with a pipe cleaner. Following this, use the pipe cleaner to move back and forth while flossing the vapor trail.

Cleaning your PAX 2 is an easy process that is also risk-free. You can clean the mouthpiece, chamber, and screen of the device with alcohol if you choose to. After that, you ought to wipe the vapor tube of the PAX2 with some alcohol. When you’ve finished with this step, you’ll be able to move on to cleaning the device. Buildups and odors will be avoided as a result. In addition to this, you need to make sure that the mouthpiece is clean. Before the PAX 2 may be used again, it must first be completely charged.

It is not difficult to clean your PAX. You can use pipe cleaners in conjunction with 100% isopropyl alcohol. It is possible to clean both the mouthpiece and the oven lid if you remove both. After that, clean the vapor path by flossing back and forth with an alcohol-soaked pipe cleaner that you have dipped in isopropyl alcohol. When you’ve finished doing this, your PAX 2 will be ready for you to use it again. You are going to need to use rubbing alcohol on a daily basis.

It is imperative that you clean your PAX on a regular basis in order to keep it functioning effectively. Applying some rubbing alcohol on the mouthpiece is a good place to start cleaning it. After you have finished with this step, you need to rinse the mouthpiece. Additionally, wipe down the top of the oven with some alcohol. This will guarantee that the mouthpiece is spotless after you’re done. If you have consumed alcohol in the past, you will need to ensure that it is clean. In addition, it is essential to refrain from using an excessive amount of alcohol because doing so may cause the apparatus to overheat and eventually shatter.

After you have finished cleaning the mouthpiece, you may use some isopropyl alcohol to clean the rest of the Pax. It is necessary to use rubbing alcohol in order to clean the mouthpiece. Because the mouthpiece will become more absorbent as a result of the alcohol, it will be much simpler to remove the saliva from the mouthpiece. In addition to that, you need to clean the lid of the oven with alcohol. The apparatus can be refilled with a solution consisting of a mixture of water and white vinegar. The dried substance can then be removed from the gadget by shaking it. After that, you can clean it with the alcohol using the rinse method.

Make sure that your PAX 2 has a full charge before you start using it. After you have connected it to an outlet, you may turn it on by pressing the power button that is located in the middle of the mouthpiece. Please be patient as the device will need a few seconds to display the temperature mode. After then, the vaporizer will begin to warm up, and the display on the screen will turn orange. If the PAX is tidy, there shouldn’t be any issues with the battery. Before using it, it is recommended to clean it with a solution that contains isopropyl alcohol because the alcohol will prevent buildup from occurring.

Similar Posts