How to Clean Owlet Socks?
A traditional baby monitor is no longer necessary with Owlet Socks. You can get a wealth of information from these socks, which your infant cannot give you themselves, such as the time at which they fall asleep, how deeply they sleep, as well as how often they wake up throughout the night. In order to prevent irritation on the skin, Owlet recommends cleaning the sock every two weeks.
I’m going to give you some tips on how to clean your baby’s Owlet Socks without damaging the sensor in any way. Getting started with this process is fairly simple, so it will feel like a “no-brainer” once you get going with it.
How to Clean Your Owlet Socks the Right Way
Having a baby can be a lot of work, if you are a parent of a baby, then you know exactly how difficult it can be. An Owlet monitor is one of the most important pieces of baby equipment that you can purchase. By using this device, parents can monitor the heart rate and oxygen level of their child at all times. There is no doubt that it is extremely useful, but it is only as good as the socks with which it is used. The socks are the most important part of your Owlet, so you need to make sure they are cleaned correctly in order to make sure it works properly. I am going to tell you how to do exactly that in this article!
What is an Owlet Smart Sock?
Owlet Smart Socks are wearable devices that monitor your baby’s heart rate and oxygen levels while they are playing. It consists of three components: the cuff, the sensor and the transmitter, and it has a battery that operates it.
Using the elastic cuff, you can wrap it around your baby’s ankle and tighten it so it fits snugly. A sensor is attached to the neck cuff of your baby and it measures the blood flow through the cuff. Your smartphone or tablet receives the data wirelessly from the sensor through the transmitter that is attached to it.
The socks are usually made of cotton, and they can be machine-washed on a cold, gentle cycle on a gentle setting to keep them clean.
Turn Off the Sensor
Owlet socks come with a charging base that resembles an Amazon Alexa and looks like one of those devices. The sensor can be turned off by the following steps:
-
Remove the charging base from the wall and unplug it.
-
While plugging the charging base back in, hold down the button on the charging base while pressing and holding it.
-
As soon as you hear the first of four chirps, release the bird.
-
When the light starts to blink orange, you should wait until it stops.
-
Once it has chirped once, release the charging base by pressing it again and releasing it on the second chirp.
-
Please wait for the charging dock and the sensor on the sock to turn off before moving on.
In the process of pressing on and off, it is easy to get confused. A more detailed explanation of this process is provided in this video.
History of the Owlet Smart Sock
In order to ensure his son’s safety, a father created the Owlet Smart Sock as a means to address his concerns. The founder of the company realized that there was a need to create a product that would help parents keep their children safe while they sleep in the wake of a series of unfortunate events, including an accidental smothering.
There have been years of research and development that have gone into creating the Owlet Smart Sock and it has quickly become one of the most popular baby products on the market. The reason this is the case is that the socks are snug-fitting and have sensors that track your baby’s heart rate and oxygen levels. As a result of these parameters, a smartphone app is loaded on your phone that monitors and transmits those parameters in real time. During one of the most stressful times of a parent’s life, this helps to give them peace of mind.
Benefits of Owlet Smart Socks
An Owlet Smart Sock is a wearable device that monitors and records the heart rate and oxygen level of an infant on a continuous basis. As a result of the Owlet sock, parents have the peace of mind that they can track their baby’s health with their smartphone, since the sock sends data to the Owlet app.
Owlet Smart Socks can be machine washed, as well as dried, making it easy to maintain and keep clean. Besides being available in different sizes, the Owlet Smart Sock is also one of the best advantages of the product because parents can choose the ones that are best suited for the foot size of their child.
Wash the Sock Using Warm Water
It is recommend berse you fill a small Tupperware with warm water and a mild detergent, once you have verified that the sensor is off. It is recommended that you do not soak the sensor in water, even though it can get wet. If you have soiled areas, you will need to scrub them with a toothbrush until you get the desired results.
Air Dry the Sock
The Owlet Sock should not be put in the dryer. There is still a possibility to damage the inner components of the sensor even if the sensor has been turned off. As recommended by Owlet, the sock should be hung inside on a clothes line in front of a fan to dry. For the item to completely dry, it should take between an hour and an hour and a half.
Turn the Sensor Back On
Don’t forget to turn the Owlet Sock back on after you have dried the Owlet Sock. If you would like to charge your socks, you need to connect them to the charging base and then press the button on the base. In case the two devices need to be repaired, follow these steps:
-
Make sure the charging base is on the right side.
-
Three times should be pressed in three seconds on the small, rectangular button.
-
Within two seconds, press twice the larger button on the remote control.
Alternative Ways to Clean Owlet Socks
Having the Owlet Sock wet may not be an option for you if you are not comfortable with the idea. The sensor should still be turned off before cleaning it, but there are other ways that you can clean it, such as:
-
Use a stain remover pen. Using OxiClean’s stain remover pen is the best solution to get rid of that pesky stain on your socks if there is only one. Having the ability to concentrate on the blemish means that you can eliminate it. The solution should still be diluted with a few drops of water before applying it to your child’s feet, so it does not irritate their skin.
-
Have multiple backup socks. It is not the socks themselves that make up the Owlet Sock: the sensor that makes the sock tick is what makes it tick. In order to reduce the number of times you have to clean your socks, you can purchase more than one pair of socks. There are different colors of these pairs of shoes available, including green, pink, and blue, and they usually cost around $40.
How Can I Maintain the Cleanliness of My Child’s Owlet Sock?
In the beginning, it might appear that your child’s foot is perfectly clean before he or she puts on the sock. It might appear as though the color of the carpet will gradually change over the coming weeks, as well as dampness and general soiling. There is a reason for this, as dead skin cell accumulation is observed in the fabric of the socks during the night. A baby does not suffer from this condition; in fact, you have lost 40,000 skin cells in the time that it took you to read this blog post.
To help you limit the number of times that you have to clean your Owlet Sock, here are some tips to help you:
-
Clean your baby’s foot before application. The sock should not get wet when it is put on your baby’s foot, because that can cause skin irritation and mold growth on the baby’s foot. The skin-to-sock transfer can, however, be reduced by wiping it down with a baby wipe several times after it has been worn.
-
Limit the sock’s use. You don’t necessarily need to put on the Owlet Sock while you’re putting your little one down for a nap if you’re putting them down for a nap. There is a purpose for taking the sleep test, and that is to determine whether your child sleeps well overnight rather than if they have cat naps during the day.
-
Clean their bedding. In spite of the fact that the blankets and sheets appear to be clean, they are actually full of invisible debris. As a rule of thumb, your child’s bedding should be changed every two to three weeks, depending on the age.
-
Only apply the sock before bedtime. There is a great chance that you will forget to put the sock on your baby’s foot when he or she begins to walk. For infants who are on the go, the sock should be taken off before playtime and reapplied just before sleep time. You are not only maintaining the integrity of your data by doing this, but you are also keeping the device clean.
-
Put a sock on top of the Owlet Sock. Your child’s foot should first be covered with the Owlet Sock before you apply it. After that, you need to slide a sock that fits loosely over it. You won’t have to worry about your child slipping off their Owlet Socks even when they are sleeping because this prevents them from getting dirty.
Are the smart Owlet Smart Socks safe for children?
In order to keep track of the heart rate and oxygen levels of your baby, Owlet Smart Socks are a new piece of technology that has been developed to help parents. A small monitor is clipped onto the diaper of the baby, and socks are placed on his or her feet. Parents’ phones receive data about their children’s heart rates and oxygen levels from the sock.
FAQ
Is it worth getting the owlet sock?
If you are wondering whether the owlet sock is worth purchasing or not, then there is no definite answer. The answer to this question ultimately comes down to your personal preferences and what feels right to you. Having their baby monitored around the clock can provide a great deal of comfort to some parents who find that this provides them with peace of mind, while other parents find other means of monitoring to be just as effective.
Is there a fee for using the Owlet Smart Sock system?
Using the Owlet Smart Sock system is free of charge, and there is no registration required.
How to Clean Owlet Socks?
It is recommended that the owlet socks be washed every week according to the instructions provided by the manufacturer. It is best to begin with removing the baby’s socks and hand washing them in warm water with a mild detergent in order to get rid of bacteria. Please ensure that you rinse the sock thoroughly and let it dry completely before putting it back on your baby. Weekly wiping down with a damp cloth will also clean the sensor inside the sock.
Can my baby’s Owlet be hacked?
Neither the app nor the cloud is used to store any of the data that you enter into Owlet. It is only the vitals and sleep data of your baby that will be stored in the device. AES 128-bit encryption is used in the transmission of this data, which is the same level of security used by banks when transmitting personal information. To ensure that the privacy of your family’s information is protected as well, Owlet has established a strict privacy policy.
Which one is better, Nanit or Owlet?
As far as the best one to choose is concerned, there is no clear winner, either Nanit or Owlet. The benefits and drawbacks of both of these products could make certain parents prefer one of them over the other depending on their preferences. There is no right or wrong answer to this question, but ultimately, it comes down to what you feel comfortable with and what you prefer. Having their baby monitored round the clock may give some parents great peace of mind, while other parents find that other monitoring methods are just as effective in keeping their baby safe and secure.
Does it matter which foot you put the Owlet on?
There is only one foot that should be worn with the Owlet smart sock and that is the left foot. Since the pulse oximeter sensor is situated at the top of the socks, wearing them with the left foot on will allow an accurate reading of the pulse oximeter when worn.
How do I clean my owlet sock 3 sensors?
In accordance with the manufacturer’s directions, it is recommended that you clean the owlet sock every week. After removing the sock from the baby’s foot, wash it in warm water with a mild detergent after removing it from the baby’s foot. Please make sure that the sock you are putting on your baby is completely rinsed and dried before you put it back on. A damp cloth should be used for wiping down the sensor inside of the sock on a weekly basis so that the sensor can be cleaned as well.
Can Owlets burn baby feet?
Owlets are not known to burn baby feet and there is no evidence to support this claim. There has been a great deal of development and testing done on the Owlet smart sock for it to ensure that it is safe for use. To ensure the safety of your family, the company also has a strict safety policy in place that you should be aware of. Your pediatrician should be consulted if you have any concerns regarding your child’s health.
How do you turn off owlet sock 3?
By removing the battery from the Owlet smart sock base station, you can turn off the smart sock from the Owlet smart sock base station. The unit will no longer be able to function after the battery has been removed.