How To Clean YETI Cooler

If you have invested in a Yeti cooler, you will want to make sure that you clean it thoroughly after each trip, as this will prevent unpleasant odors and the growth of mold inside the cooler.

Cleaning your Yeti cooler does not have to be difficult, and even if you have been outside and your Yeti cooler is utterly filthy inside and out, the following instructions on how to clean a Yeti cooler can help you have your cooler looking and feeling brand-new in no time at all. Cleaning your Yeti cooler does not have to be difficult.

The process of learning how to clean a YETI cooler is rather straightforward. To get rid of the majority of the filth and grime, all you need is a sponge, some water, and some soap. When cutting through harder stains with bleach and water, use a ratio of 7:1 for the bleach to water mixture. After that, use a pressure washer to bring the YETI back to its original, pristine condition.

The outdoor business has been completely disrupted by YETI’s introduction of some of the most innovative and high-quality coolers and food-storage options available.

The YETI cooler, which is famous for its ability to keep ice for three to five days, is available in a wide variety of sizes and types; nevertheless, one thing is consistent across the board: they all get dirty.

The vast majority of YETI coolers are constructed out of tough plastic that is designed to last a lifetime. However, this plastic has a few flaws, including the fact that it can readily collect dirt, become discolored, and even scratch rather simply.

In this article, we will go over several different methods on how to clean a YETI cooler, how to get a white YETI cooler back to its original white color, and we will also go over some of the most often asked questions regarding YETI coolers.

How to Clean a YETI Cooler – Before Use

So, you and some of your friends are heading to a beach party. Or perhaps it is only for the purpose of barbecuing or tailgating. You should wipe out your cooler before you start loading it up with different sorts of food. To effectively clean your YETI cooler, you will, at the at least, require some clean towels, clean water, and liquid dish soap in liquid form.

To begin, get a dishrag, some liquid dish soap, and a few cups of water, and begin washing every component of your cooler. Don’t neglect to check that the sides of your cooler are clean by running your fingers down each one.

After that, give it a good washing with some clean water. Repeat this process multiple times to ensure that all of the soap has been removed. Clean the exterior of your Yeti cooler with the cloth you have available to you. After that, you won’t have to worry about the potential for food poisoning if you place raw or edible objects within.

To begin, equip yourself with a sponge, some soap, and some warm water. In most cases, it is all that is required. If the stains are really stubborn, you can also try combining bleach with warm water in a ratio of six to one and letting your Yeti cooler soak in the solution. It is possible to remove many stains with a Magic Eraser, particularly on a white Yeti cooler. A pressure washer is another option for effectively removing all stains and grime in a short amount of time.

Do you enjoy getting out from the house on the weekends?

It’s a lot more exciting to get ready for an expedition and load up all of your belongings than it is to get back home and unpack everything.

Especially considering the fact that your YETI is a complete mess and calls for a thorough cleaning.

I’m going to demonstrate how to clean your Yeti cooler in this post in the event that it has a little bit of grime on it and may need some sprucing up. I’m going to show you how to eliminate those stains as well, even if it’s a massive Tundra 75 that’s a complete disaster and covered with stains that run deep.

At the end of this guide, you will know how to clean a YETI cooler in ten minutes or less, allowing you to take a load off and enjoy some downtime.

See also  How To Clean Wii U Gamepad

What You’ll Need to Clean Your YETI Cooler

It is dependent on the level of filth within your YETI or whether there are any stains. It’s highly unlikely that you’ll need everything that’s listed here, and there’s a decent chance that you already have a lot of this stuff lying around.

  • Dish soap
  • Non-abrasive sponge
  • Bleach
  • Magic Eraser
  • Power washer

How to Clean a YETI Cooler and Remove Tough Stains and Smells

If you have the appropriate cleaning supplies, maintaining a clean YETI cooler is a simple and speedy endeavor.

If you’ve gone camping and there’s some dirt on your cooler and the inside has a bit of a scent to it, you won’t need to go as severe as if you’ve quartered a deer and have been holding it in the cooler overnight. There are obviously different levels of dirtiness when it comes to coolers.

Therefore, this instruction is organized according to the various degrees of filth that your YETI cooler may be subjected to.

1: Use Warm Water & Soap

Use warm soapy water to cut through the grime on your cooler if the cooler is not particularly unclean and merely requires a fast cleaning.





To get started, pour a quarter cup of liquid dish soap into the base of the cooler.Utilizing a hose that has been heated by the sun for a period of time is one of the simplest and most convenient ways to warm the water before adding it to the container.

When the YETI has reached its capacity, grab a scour sponge and go to town on the entire cooler. If the filth is difficult to remove, you might require a more intensive cleaning solution, which we will go over in the following section. When you are certain that the YETI has been well cleaned, empty out the soapy water, rinse the cooler, and set it somewhere in the sun to dry!

2: Soak with Bleach, at a 7:1 Ratio

Even after you’ve cleaned it with soap and water, does your YETI still have a putrid odor? If that’s the case, it seems like you need to break out the bleach. During this stage of the process, gloves are need to be worn. In a bucket that holds 5 gallons of water, combine bleach in a ratio of 7:1 to the water. It is easier to control the concentration of the bleach solution if you do these steps in a bucket first, then transfer the bucket’s contents to the cooler. If you want to avoid the bleach smell that will be left behind in the cooler, dilute the bleach solution with a significant amount of water before putting it in the cooler.

After the bleach solution has been poured into the YETI cooler, the cooler should be scrubbed with a brush that has a long handle attached to it.Your skin will not come into contact with the bleach because the handle of the scrub brush protects it. If there are any locations on your Yeti that have persistent stains, apply the bleach solution and scrub in a circular manner until the stain is gone.

When you are finished cleaning the YETI, empty out the bleach solution, rinse the cooler, and then set it aside to dry in the open air.

3: Use Vinegar and Baking Soda

There are others who would like not use harsh chemicals or detergents like bleach or detergents to clean their Yeti coolers.If you want to avoid any of those cleaning chemicals, a fantastic alternative is to make use of vinegar and baking soda.

Mix together 1 cup of baking soda and 1 cup of vinegar in a single container. Scrub the exterior as well as the interior of the cooler with the mixture that has been applied to a scouring sponge.

Vinegar is an extremely effective and natural cleaning product that may remove difficult stains from a variety of items, including YETI coolers. Vinegar can be purchased at most grocery stores or online.If there is a stain on your ice chest, add the solution to it, let it sit for a few minutes, and then scrub it away using circular strokes.

After you have finished thoroughly cleaning your YETI, you should rinsing it with water and then allowing it to air dry.

See also  how to clean iron door

4: Use a Magic Eraser

You want your white Yeti cooler to look as good as it did when you first bought it, do you?You might want to try utilizing magic erasers.

Magic erasers are an excellent option for cleaning stubborn stains off any color Yeti cooler, including those that detergent, vinegar, and bleach were unable to remove.

Simply run the magic eraser over the stained sections of your YETI, and watch the dirt come right off of the plastic as you go.

The odor of the cooler as a whole will not be improved by this change, but its appearance will be completely different.

5: Use a Pressure Washer

Stop searching for the simplest and most efficient method to clean your YETI cooler because you have found it.

To swiftly remove any filth and grime that may be found within or on top of the cooler, you can use a power washer. Power washers are capable of removing even the most stubborn stains.

To prevent the cooler from being harmed, ensure that there is a distance of at least one foot between the wand of the pressure washer and the cooler.

If your cooler has already been thoroughly cleaned using one of the ways described above, and it only needs a little bit of a touch-up, then this procedure will work exceptionally well.

The Best Way to Clean a YETI

It only takes me about three minutes and requires only a small amount of soap and water for me to clean my YETI tumbler after each of the majority of the trips I go on. In addition, I do not require any specialized additional equipment.

However, I have gone fishing while carrying my YETI with me, and it has caused some unpleasant odors to become trapped inside. To do that, all that was required was a small amount of bleach and a few hours of soaking time.

Utilize a pressure washer on your Yeti if it has a significant amount of grime, stains, or an overall worn and used appearance. After a couple of passes, you’ll be pleasantly amazed at how nice it appears. I have seen folks take a white YETI that was almost completely crimson from filth and clay and make it appear as good as new in less than five minutes.

If you don’t have access to a pressure washer, you can get the same results by washing the surface with soap and water, then removing any remaining stains using a Magic Eraser. It works like magic and can make even the dirtiest YETI look like it was just cleaned at the shop, which is a testament to its effectiveness.

Make Sure You Leave It To Dry

Always make sure to let your cooler dry out completely after you’ve finished cleaning it.

You can do this task by placing the cooler on its side with the lid open; however, I find it easier to accomplish this task by inverting the cooler with the lid open and placing it on its side. This also ensures that even if I unintentionally leave my cooler outside for an extended period of time and it begins to rain, the contents of the cooler will not become contaminated with mold due to the accumulation of water.

Additionally, the sun is quite effective at eliminating odors. If you find that your Yeti cooler still has a slight odor after you have cleaned it, click here to read about how to eliminate unpleasant odors from your Yeti cooler.

Use Clorex Anywhere Spray or a Sanitising Spray

After you have finished cleaning your cooler and given it a test run, you may use Clorox Anywhere Spray, wait for it to dry, and then use it to easily remove any unpleasant odors. Additionally, you can use a sanitizing spray to keep the cooler clean and sanitary.

Can You Put Bleach In a Yeti Cooler?

It is possible to use bleach in a cooler with hard sides; however, it is recommended that you use bleach that has been diluted with water, rather than pouring bleach straight into the cooler. at most cases, cleaning your cooler and removing mold and stains successfully with bleach and water at a ratio of six to one works very well.

It is strongly recommended that you do not use bleach on a Yeti cooler with soft sides because doing so will cause the fabric to lose its color and will also cause the fabric to disintegrate.

See also  Cleaning a Honey Mess


What can I use to clean the inside of my YETI?

The interior of your Yeti should be cleaned using dish soap, water, and a sponge. This is the most effective method. If the odor lingers, another option is to fill your Yeti with water and bleach at a ratio of 6:1, let it soak for a few hours, and then rinse it out. That will get rid of any offensive smells and make your Yeti suitable for use once more.

How do you get scuff marks off of a YETI cooler?

You won’t be able to get rid of the scuff marks no matter what you try, but if you use a Magic Eraser, you should be able to cure the discolouration. That will make the scuff marks look as excellent as they did when they were first made. However, when you take your YETI on another journey, the issue location will be one of the first spots to start discoloring again.

How do you get the smell out of a YETI cooler?

Fill your Yeti cooler with water and bleach in a ratio of 6 to 1, and then thoroughly soak its interior. It should be allowed to soak for at least an hour before being rinsed and washed with soap and water.

Do White YETI coolers get dirty easily?

It is true that white YETI coolers are more likely to display dirt and grime than other colors. On the other hand, cleaning a YETI cooler isn’t that difficult, especially if you have a power washer. If you don’t have access to a power washer, you may also use a Magic Eraser to make your White YETI appear as good as it did the day you bought it.

How To Replace YETI Cooler Latches:

If you use your Yeti cooler on a regular basis, there is a risk that the latches have become damaged as a result of your usage. Thankfully, the goods made by YETI come with improved latches that don’t require much effort to put together.

How To Fix Yeti Cooler Zipper:

In recent years, YETI has begun selling a line of bag coolers, which includes bag coolers that come in a variety of shapes and sizes and are frequently closed using a zipper. You can get instructions on how to fix the zipper on your YETI cooler right here if it has broken.

Can You Repaint A YETI Cooler?

Are you dissatisfied with the color of your cooler? Retouch the paint! It is possible to repaint a YETI cooler, so don’t discount the possibility. To finish repairing the cooler, all you have to do is use spackle to repair any dents or dings, sand it down, and then paint it with the color of paint you want.

Can You Clean A YETI Cooler With Bleach?

Yes, the use of bleach on any and all YETI items is both effective and safe. After each application of the bleach, it is imperative that it be heavily diluted and properly washed away.

How Do You Get The Smell Out Of A YETI Rambler?

The most effective and time-efficient method for cleaning a YETI rambler is to fill it with hot water, add a few drops of dish soap, and then let it sit for five minutes to let the detergent work its magic. After it has had some time to sit, you should wash it and then completely dry it.

Does YETI Have A Lifetime Warranty?

Given that most YETI items are on the pricier side, the company’s policy of providing a lifetime guarantee on all of its products is certainly appreciated. Call the YETI customer support team if you are having issues with the items you purchased from them.

Similar Posts