How often do you give your Juul a good cleaning? Do you even bring it up in conversation? Make an effort to recall that you purchased your Juul quite some time ago. Now, remember back to the most recent time you washed it and how it turned out.
Maintaining a consistent cleaning routine for your Juul will ensure that it lasts longer and continues to function well for a longer amount of time. You just need some tools and some patience to get the job done.
Even if you take good care of your Juul and clean it often, the pod may still leak somewhat if you travel or experience variations in altitude. A speedy cleaning will prevent residue from accumulating, and it will also protect your taste buds from being exposed to liquid nicotine that you did not intend to consume.
Regular cleaning helps to ensure the longevity of both your JUUL and its battery. If you forget about your JUUL, the pods could potentially leak, which would result in buildup. This may result in accessibility issues, or even worse, the requirement for a funeral service to be held in JUUL. Continue reading to learn how to properly clean a Juul.
How JUUL Works?
Understanding how your JUUL works is essential if you want to clean it the right way and prevent any harm. The JUUL is a portable vaporizer that has three components: a pod, the JUUL device itself, and a charging dock that accepts USB.
The pod is placed in the JUUL device through a dedicated opening and is secured there by two clamps once it is in place. There is no need for any kind of specific setup because the JUUL instantly activates and gives the appropriate amount of energy to heat up the coil of the pod as soon as you take your first drag. To sum up, this is what the smoking process looks like.
The connection between a JUUL battery and a JUUL pod is made by use of spring-loaded pins. The USB port for charging the battery is located at the bottom of the device, and the battery itself takes up around 80 percent of the total space in the device.
Why Clean Your Juul?
The juices contained within the Juul pods have the potential to seep into the battery and other components if the device is used often and for an extended period of time.
Your vaping experience may be severely impaired as a direct result of the leaking, which may also result in operational problems with your Juul device. In the worst-case scenario, it can even cause your beloved Juul to suffer a slow and agonizing death.
It’s possible that the charging and connection problems on your Juul can be fixed by giving it a good cleaning.If you are unable to charge your Juul, it is likely because something is preventing the battery connectors from creating a solid electrical connection that will allow your device to be charged.
If you keep the Juul in your pocket for an extended period of time, the port for charging it may become clogged with lint. In addition to dust and debris, another factor that might obstruct the battery connectors is moisture.
These kinds of external factors can make it impossible to establish a reliable electrical connection, which reduces the amount of power that is delivered to the battery. This might lead to dry hits that are of a low quality, a reduction in flavor, or a scorched taste.
Do you agree that life is too short for a vaping experience that is just average?
Therefore, in order to avoid problems like these causing damage to your Juul, you need clean your vaping device on a regular basis.
2 Tried & Tested Ways to Clean Your Juul
In general, you can clean your Juul in one of two methods without risking any harm. The first technique entails nothing more than a dry cleaning, whereas the second calls for the utilization of alcohol.
The condition of your Juul should guide your decision regarding which strategy to utilize.
If you have a newer model of Juul, you may skip the step of thoroughly cleaning it with alcohol and just wipe it dry instead. The alcohol treatment is necessary for older models that have been used more frequently than you would like to admit to using.
Once a month, you should perform this maintenance approach on your Juul.
Step 1: Remove the Juul pod from the mod by snapping it out. Now, using a cue tip, clean up the slot where the pods go in the Juul.
The purpose of this step is to clean the slot by removing any extra e-liquid that may have leaked onto it.
Step 2: Employing a tool with a thin tip, clean out the entrance region of the mod (the mainframe of the Juul) to remove any form of buildup (dirt, filth, etc.) that may have developed there.
Tweezers are an excellent tool to use in this scenario, in my experience.
The Juul’s metal connection pins, which link to the Juul pod, need to have the right amount of liquid drained from them.
When a Juul pod is inserted, the pins are forced in, which creates a little opening. This happens every time. This results in e-liquid soaking through the mod, which almost always has disastrous consequences.
Carefully going through the following suggestions will help you avoid having something like this occur.
- While you are performing the cleanup, make sure that the metal connection pins are facing down. After you are through, use a cue tip to gently compress the pins. This enables the cue tip to absorb the juice that has been trapped.
- Compressing the pins for any more than two seconds is not recommended. Carry on with the draining process until the cue tip is no longer able to absorb juice from the pins.
Step 4: With the use of a cue tip, remove any lint, dust, or dirt that could be visible on the charging port. You could even do this with a dry toothbrush if you wanted to.
Cleaning with Alcohol
If you find that some of the e-liquid in your Juul has congealed into a solid mass, it is time for you to switch to the alcohol cleaning procedure.
Why do you feel the need to drink alcohol? To put it simply, it contributes to the process of dismantling the calcified and sticky accumulation.
After the alcohol has finished working its magic, the residue can be effortlessly removed with a cue tip or a piece of paper towel.
However, you should be aware that this kind of cleanup presents some dangers, so you should proceed with extreme caution.
Step 1: To begin, detach your Juul pod from the main body of the device.
Only one end of a cue tip should be dipped into the alcohol solution; the other end should remain dry. The extra alcohol should be let to drop off, and you should wait for the cue tip to become damp.
Step 2: Before attempting to clean the metal connecting pins with the cue tip, make sure that the Juul battery is completely inverted. Take care not to squeeze them, as we do not want the ethanol to go into the device through the pins if at all possible.
In order to prevent alcohol from reaching the internal mechanisms of the Juul, we need to ensure that it is kept inverted at all times. In the event that we accidentally compress the pins, we may count on gravity to save us and prevent a catastrophe.
Step 3: If you give it a quick wipe, you should be able to loosen or remove the most of the sticky deposit that has formed.
Use the dry end of the cue tip to remove any residue that was left behind after you have completed your initial wipe. This step is necessary regardless of how well your original wipe went. The alcohol on the gadget ought should be successfully absorbed by the dry end of the device.
When carrying out this procedure, you need to be careful not to squash any of the pins.
Step 4: It is necessary to clean the charging port on the Juul in order for the cleaning process to be successful.
If you notice any grit or dirt in that area, clean it with another cue tip that has been soaked in alcohol. After that, use the dry end to absorb the alcohol, and after that, use the wet end to remove any residue that was left behind.
Cleaning with cotton
To begin, take the JUUL pod out of your JUUL and wipe it off with a paper towel or cotton bud to remove any extra liquid. It’s possible that you’ll need a pair of tweezers to remove any hard accumulation.
The next thing you need to do is empty the interior of your JUUL of the connecting metal pins. Maintain the inverted position of your JUUL and use a cotton bud to compress the two pins. This will allow you to absorb any residue that may be present in the cotton. Continue doing so until there is no trace of residue left.
How to clean a Juul battery with rubbing alcohol
If you want to clean your Juul more thoroughly, then you’ll have to go with the alcohol technique. In spite of this, you must carry out these steps with extreme caution so that no liquid enters the interior of the Juul or the battery; otherwise, you risk damaging the device.
Put some alcohol on a Q-tip, and then put that Q-tip into the alcohol. The most important thing to do now is to remove as much of the extra alcohol as possible using the Q-tip so that it is dry and not moist. After removing the mouthpiece from your Juul, wipe the entire device down with the alcohol-soaked Q-tip.
Make sure that the pins are not compressed in any way, and clean the area surrounding the metal pins. It is really crucial that you do not forget this. In that case, the Juul system you use could sustain damage that cannot be repaired. When you get to the battery, use the Q-tip to carefully wipe away any excess dirt, filth, or buildup from the surface; however, be careful not to press down on the metal pins while you do so!
In the end, wipe the entire Juul system by wiping it down with dry cotton buds or paper towels.
How to remove Juul battery and cleaning with tweezers
If you don’t clean your Juul system for a sufficient amount of time, dirt and grime can accumulate, resulting in a kind of cakey coating that is challenging to remove with a Q-tip. Tweezers can be used to clean the Juul system and the battery in preparation for this process. This is how you can go about doing it: The first thing that you need to do is open the mouthpiece of the Juul and clean it with a Q-tip that has been dipped in alcohol or one that is clean.
When you finally reach the metal pins that link the components, you can use a dry Q-tip to thoroughly clean the area around them. Use the teeny-tiny pair of tweezers you have to carefully scrape out or fish out of this location any accumulated filth and sludge. During this stage, exercise extreme caution because you do not want to scratch the battery or do anything else that could result in harm.
Turn the Juul device over and place a paper towel or other absorbent material underneath it. Now, take your Q-tips or a piece of paper towel and compress the metal pins in order to extract the fluids. If you do not, the liquids will seep into your battery, which will result in the battery being ruined. It is essential that you carry out this step in order to ensure that you use a dry Q-tip to wipe away any extra leaking liquid.
In severe circumstances, prolonged disregard can result in major health risks. One example of this is when a battery is not charged and there is no vapor produced. If your JUUL has reached this point and you are concerned that it may not function in the future, you may need to consider having it surgically repaired. Because doing so would void your guarantee, you should reserve this option for an absolute emergency only. Before making this change, it is highly recommended that you consult the troubleshooting guide available on the JUUL website.
At this juncture, JUUL users are faced with a choice: either they can make an appointment for a JUULneral, or they can opt to undergo high-risk surgery. Be forewarned that taking apart a JUUL is a laborious and delicate process that puts you in the position where you run the risk of losing your JUUL in an instant.
To begin disassembling your JUUL, press down on the LED light located at the top of the device. And then taking it out of its metal casing and forcing the contents out of the JUULpod by jamming a blunt instrument into the entrance of the device.
After you have removed all of the internal components of the JUUL, you will have access to the battery. After that, remove the rubber seal from the top of the battery, which is located close to the pins; doing so will make it possible to thoroughly clean them. When removing this component, exercise extreme caution because it can be fragile to mount the pins.
Applying light pressure while using a paper towel or cotton bud to dry clean the internal components of your JUUL is the best way to do this. You can also use this as a time to clean the outside casing thoroughly; however, you need to make sure that it is totally dry before you reassemble your JUUL.
When it comes to maintaining the cleanliness of your Juul device, it is recommended that you clean it on a regular basis with a dry cotton swab, some Q-tips, or some paper towels. Aside from that, it is important to use tweezers to remove juices, dirt, and grime from the Juul battery, and you should only use the alcohol approach occasionally because it can be highly dangerous if the alcohol gets into your Juul battery.
One additional essential point to keep in mind is that, unless it is absolutely required, you should refrain from disassembling your complete Juul system. Every once in a while, you get into a situation in which none of the cleaning methods that you employ are effective enough to clean the Juul device or the battery. In this section, you will be able to disassemble every component of the JUUL and clean each individual portion of the device.
How to clean a juul charger
You are going to need the following products in order to clean a Juul charger (or battery):
- Cotton swabs or a soft cloth could be used.
- Isopropyl alcohol can be used instead if desired.
- Unplug the Juul charger, and using a soft cloth or cotton swabs, remove any dirt or grime that may have accumulated on it.
- If the charger is extremely soiled or there is dirt or grime that has become adhered to it, you can use a tiny amount of isopropyl alcohol to help loosen and remove the material by applying the alcohol to the surface of the charger. Be sure to use an alcohol with a high concentration (at least 70%), and before applying it to the entire charger, test it on a tiny, inconspicuous region first.
- Use a clean, dry cloth to remove any remaining dirt or grime from the charger, and then let the cloth air dry.
- Before re-using the charger or plugging it in, you should give it adequate time to thoroughly dry out.
Can you disinfect a JUUL?
It is possible to disinfect a Juul e-cigarette, which can assist in the reduction of the likelihood of contracting germs and bacteria. You will require the following items in order to properly sterilize a Juul:
- Isopropyl alcohol with a minimum concentration of 70%
- Cotton swabs or a soft cloth could be used.
- Instrument for cleaning that is tailored solely for use with Juuls (optional).
- Disassemble the Juul in accordance with the directions provided by the manufacturer. In most cases, this requires taking apart the pod as well as the mouthpiece.
- Isopropyl alcohol can be used to assist in the killing of germs and bacteria when it is wiped across the mouthpiece and the device using a soft cloth or cotton swabs. If you want to make sure that the alcohol is successful at disinfecting the gadget, you should make sure to use a high concentration of it (at least 70%).
- To help remove any buildup or debris from the heating element of your Juul, a cleaning tool that was made exclusively for Juuls should be used. These instruments, which are typically composed of silicone or other gentle materials, can be put into the heating element in order to gently scrape away any debris that may have accumulated there.
- Reassemble the Juul and do a functionality check to ensure that it is in good working order.
- It is possible that you will need to take the Juul to a professional cleaner or technician in order to have it further cleaned or repaired if it is significantly filthy or damaged.
If you follow these instructions, you will successfully be able to clean your Juul. It is important to remember to handle and clean the device with care, and to steer clear of harsh chemicals and abrasive cleaners, since these can damage the Juul or remove its shine. To assist maintain the greatest possible performance, it is essential to adhere to the guidelines provided by the manufacturer regarding use and maintenance.
How do you clean a burnt JUUL pod?
In order to properly clean a Juul pod that has been burned, you will need to follow these steps:
- Take out the Juul pod and put it in a safe place.
- Wipe the pod down with a gentle cloth or cotton swabs to remove any dirt or grime that may have accumulated on it.
- If the pod is extremely soiled or there is dirt or grime that has become adhered to it, you can use a tiny amount of isopropyl alcohol to help loosen and remove the material by rubbing it over the surface of the pod. Be sure to use an extremely high quantity of alcohol (at least 70%), and before applying it to the entire pod, test it on a small, inconspicuous region first.
- Use a clean, dry cloth to remove any remaining dirt or grime from the pod, and then set it aside to dry.
- It is possible that the burned or otherwise damaged pod may need to be discarded and a new one installed in its place.
If you follow these instructions, you will be able to effectively clean a Juul pod that has been burned. It is important to remember to be careful when cleaning and handling the pod, and you should steer clear of using any harsh chemicals or abrasive cleaners, as these might cause harm to the pod or remove its gloss. If the pod has been severely damaged or burned, it is conceivable that it cannot be cleaned and that it will need to be replaced instead.
Do JUULs still work after being washed?
It is strongly advised against washing a Juul e-cigarette, as water and other substances have the potential to cause irreparable harm to the device. If a Juul has been washed, there is a possibility that it will no longer function properly or at all.
Both the battery and the heating element inside of the Juul device are susceptible to damage if they come into contact with liquids of any kind. The gadget may become dysfunctional due to corrosion caused by water or a short circuit caused by water. In addition, the Juul pod includes e-liquid, which, if exposed to water, can become ruined or diluted, resulting in vapor that is less flavorful or a device that does not perform properly.
If a Juul has been cleaned but is still malfunctioning, it is feasible to get it fixed by a trained professional technician. This is especially true if the Juul has been used. However, it is possible that a used Juul that has been washed will no longer function properly and will need to be replaced.
It is essential to keep water and other liquids away from the interior of your Juul in order to prevent it from becoming damaged. If the Juul gets dusty or soiled, you can clean it by wiping it down with a dry, soft cloth or cotton swabs to remove any dirt or grime that may have accumulated. In the event that it is necessary, you can make use of a very small amount of isopropyl alcohol in order to help loosen and eliminate any dirt or filth that has become adhered. Before applying it to the entire device, you should test it on a tiny, inconspicuous region first and then use alcohol with a high concentration (at least 70 percent).
Some helpful tips
In conclusion, the following is a list of useful advice that might help you extend the life of your gadget.
- It is in everyone’s best interest to prohibit the use of JUULs in public places when there is a significant amount of frost, as the resulting buildup of condensate will quickly render the device’s electrical circuit inoperable;
- Take precautions to protect the battery from pollution, overcharging, and overdischarging;
- Do not let the gadget to remain discharged for an extended amount of time;
- It is very important that you pay close attention to the bottom of the JUUL pod. If the liquid is leaking from the pod, you should try to clean the surface of the pod multiple times per day, depending on how much liquid is seeping.
Leaking pods is a problem that a significant number of people who use JUUL report encountering. When utilizing the device, this is not an uncommon occurrence and should be expected. To prevent this from occurring, be sure to use the product in accordance with the manufacturer’s instructions:
- Perform a moderate amount of tightening;
- When you are using the JUUL, be careful not to apply too much pressure to the pod;
- Do not apply excessive pressure to the pod with your lips;
- When you are inserting the cartridge, be careful not to squeeze it too tightly.
Also, make sure you only use a charger that is in good working order. It is recommended that if the charger is damaged, either it be repaired or replaced with a new one.