how to clean puffco peak pro atomizer

Puffco Peak Pro: Cleaning Guide

You performed the necessary research, decided to go for it, and in the end, you decided to reward yourself by purchasing the magnificent Puffco Peak Pro. Congratulations for getting this far; you have demonstrated excellent judgment thus far.Your next important choice should be to ensure that it receives the utmost care so that it can be enjoyed for a very long time. It is inevitable that everyone who uses it will eventually make a mess of it, no matter how careful they are. In this instruction manual, we will cover everything you need to know to properly clean and maintain your Puffco Peak Pro.

Top Selling Cleaning Products for PEAK Pro:

Puffco suggests that customers clean their devices on a regular basis to ensure the best possible experience. They do not specifically indicate how frequently because the answer to that question is contingent on how frequently it is used. If you use it every day, we advise giving it a deep clean once each week. Every time the battery is completely drained to the point that it needs to be recharged, you should give it a thorough cleaning. If you observe that there is excess flooding or if the gadget gives you a red-blue reaction, you should soak the atomizer.

TIP: Swabbing your chamber with an ISO-soaked cotton swab after each use is a great method to prevent having to clean it more frequently than you would otherwise need to.

In this instruction manual, we will cover everything you need to know to properly clean and maintain your Puffco Peak Pro.

Puffco Peak Pro Cleaning Guide: You Will Need…

  • Cotton Swab/Q-Tip
  • 99%+ isopropyl alcohol

TIP: You are able to make do with a lower percentage if you are unable to obtain 99% of what you want.Isopropyl alcohol with a percentage of 99% is recommended by Puffco since lower percentages contain a higher amount of water, which “could potentially cause issues.”

Disassemble Puffco Peak PRO

Atomizer/Chamber

  1. Remove the cap.
  2. Turn your atomizer counterclockwise to unscrew it from the base.
  3. Remove the atomizer

Glass

  1. Maintain your grip on the base with one hand while snatching the glass with the other.
  2. To remove the rear of the glass from the base, first unclip it and then gently pull it outward until it is free.

What To Clean?

The chamber of your Puffco Peak Pro is the component that requires the most attention to detail regarding cleanliness. This is due to the fact that it has the greatest amount of interaction with concentrates. An unpleasant dabbing experience could be brought on by an excessive buildup of residue and filth. Additionally, it is of the utmost need to maintain a clean base and glass in order to prevent the accumulation of dirt.

How to Clean the Puffco Peak Pro: Chamber/Atomizer

Light Clean

  1. Simply take a cotton swab or a Q-tip and soak it in the isopropyl alcohol.
  2. Remove any dirt or residue from the gold connection points that are located on the bottom of the chamber using a cotton swab.
  3. To remove any residue from the chamber, use a cotton swab.
See also  How To Clean A Bearded Dragon

TIP: According to our findings, the best results may be achieved with this strategy when the space being utilized has only been recently utilized and is still slightly warm. Before you attempt to handle it, kindly wait until it has cooled off.

Deep Clean

  • Fill a glass or beaker with the alcohol that has an ISO of 90% or above.
  • At a minimum of half an hour, the container should be submerged.

Warning: Under no circumstances should you try to submerge the chamber in water. Ceramic that comes into contact with water has the potential to sustain damage.

How to Clean the Puffco Peak Pro: Glass

  • Put some isopropyl alcohol in a glass or beaker.
  • After thirty minutes, completely submerge the glass in the beaker.
  • After soaking, remove the object and give it a thorough cleaning with fresh water in order to eliminate any remaining alcohol.
  • Before reattaching the glass to the base, be sure it has completely dried off.

Warning: You should make every effort to prevent water from getting into the lower chamber of the glass.

How to Clean the Puffco Peak Pro: Base

  1. Simply take a cotton swab or a Q-tip and soak it in the isopropyl alcohol.
  2. To ensure that the connection is established correctly, swab the gold connection points on the base.
  3. Apply some q-tip to the airway and swab it.

Warning: Wait until all of the components are completely dry before reassembling them after cleaning them. Because it is electric, avoid getting the base wet at all costs; doing so will likely render it useless.

TIP: It’s possible that you’re using too much material in each session if you find that you need to clean your chamber more often than usual. If this is the case, we tip our hats to you because the bowl on the Puffco Peak Pro is quite large. If this is the case, congratulations! The optimal amount of concentration to utilize is just that amount that can be completely vaporized without leaving any residue behind.

How to clean puffco peak pro atomizer?

  1. Utilizing a moist towel is the most straightforward method for cleaning the Puffco Peak Pro atomizer.
  2. Be sure to move around the coils and penetrate the interior of the atomizer.

How do you clean a Puffco Peak Pro chamber?

It is simple to clean the chamber on a Puffco Peak Pro. You will only need some hot water and a towel for this. The chamber should then be filled with hot water, the cloth should be placed over the mouthpiece, and the device should be left to soak for a few minutes. After that, use the cloth to thoroughly clean the space.

How often should I clean my Puffco Peak Pro atomizer?

Each time you use the Puffco Peak Pro atomizer, you need to ensure that it has been well cleaned. To get the mouthpiece out of the atomizer so that you can clean it, just unscrew it from the base. To remove the coil, unscrew it from where it is attached to the base. Clean the coil and atomizer by rinsing them in warm soapy water. Before reassembling them, make sure they are thoroughly dry.

Can you soak the Puffco peak atomizer?

The Puffco Peak atomizer should not be submerged in liquid under any circumstances.

How do you take apart a Puffco pro?

There are a couple different approaches of disassembling a Puffco pro. One solution is to take out the screws that are connecting the upper and lower sides of the gadget to each other. After those screws have been removed, the top portion of the device can be lifted off at this point. The bottom half of the gadget can be disassembled using the same approach as described above.

How do you deep clean Puffco?

The Puffco is a machine that is not overly difficult to thoroughly clean. You will only require some hot water, some soap, and a cloth to do this task. In the beginning, you will need to fill the machine’s water tank and then turn it on to its warmest setting. After that, add sufficient soap to completely coat the machine. The final step is to dampen the fabric by first soaking it in water and then wringing it out. Place the piece of fabric over the top of the water tank, and then wait a few minutes before removing it.

Can you soak Puffco atomizer in alcohol overnight?

Sadly, the answer is no. Alcohol will degrade the plastic, rendering it useless in its current state.

How do you clean an atomizer?

If the atomizer is unclean, you can disassemble it and clean each of the component pieces separately. You can give it a quick rinsing with water and then allow it to air dry if the dirt isn’t too bad.

Can you soak Puffco plus chamber in alcohol?

It is possible to clean a Puffco Plus Chamber by soaking it in rubbing alcohol. Before you use it again, just make sure that it is completely dry first.

Can you clean Puffco with hydrogen peroxide?

Yes, you can clean Puffco with hydrogen peroxide. When cleaning any electronic item with hydrogen peroxide, however, you really must exercise extreme caution because there is a risk of the device catching fire or being damaged in some other way.

Can I soak my atomizer?

This question cannot be answered with a definite response because the answer will vary depending on the atomizer that you are utilizing as well as the kind of e-liquid that you are vaping. Some atomizers may be cleaned simply by submerging them in water, while others may require that the component parts be removed first. Before you begin soaking your atomizer, it is strongly recommended that you check the instructions provided by the manufacturer first.

How often should you clean Puffco peak?

In most cases, cleaning the Puffco Peak is not required to be done. About once every three and a half months, the typical user ought to clean it.

How do you clean Puffco ceramic?

There are a number different approaches of cleaning the ceramic goods sold by Puffco. One method is to combine water with a dishwashing liquid that is on the milder side. Use of a non-abrasive cleaning product such as Bar Keeper’s Friend is still another alternative. If the product gets stained, you can try cleaning it with a cleaner made specifically for ceramics, such Mr. Clean Ceramic Cleaner, if you want to get the stain out.

How do you clean a ceramic atomizer?

Ceramic atomizers are simple to maintain and thoroughly clean. Simply take off the mouthpiece, and then use a toothbrush to clean the chamber that is contained within the atomizer. Be careful to explore all of the cracks and crevices!

Final words

We sincerely hope that our cleaning instruction was of assistance to you. The finest piece of guidance that we could provide would be for you to make cleaning your Puffco Peak Pro a regular part of your regimen. The most effective approach to taking care of this matter is to convince yourself that you will clean it each time the battery dies completely. Alternately, you might schedule a monthly reminder on your calendar to ensure that you perform a thorough cleaning of your product. Happy dabbing

Similar Posts