|

How To Clean A Hot Comb

Replacing your hot comb regularly is not easy. Neither is it cheap, especially with the financial constraints hitting everyone in this post-corona period. You might want to save a few bucks by taking good care of your hot comb. But, there is no need to buy a new pressing comb when you can easily wash your current comb clean.

Typically, it would be best if you cleaned your hot comb once or twice a month. However, it depends on the strength of the petroleum jelly products you apply to your hair. In addition, using certain petroleum-based products may require that you clean your hot comb frequently.

Develop the habit of removing physical dirt immediately when you use the comb. That will help reduce the hassle that comes with washing the hot comb. Below are quick steps to follow when cleaning your hot comb.

It would be a complete waste of money to buy new hot combs from beauty supply stores every time they get dirty. That’s why you need to know how to clean a hot comb. In order to make them last longer and work properly, you need to take good care of hot combs and wash them once in a while. It depends on how often you use it or if you use many hair products.

In this article, we will show you how to clean your hot comb easily and cheaply. Follow these steps and your hair comb will always be clean and ready to use.

When Was the Last Time You Cleaned Your Hot Comb?

See also  How to Clean Vapormax Bubble

Two cleanings of your styling tool should be adequate for the duration of one month. If you have long straight hair as I do, though, you should scrub it more frequently.

Hair is composed of oily and dirty hair products. If you use heated combs on a regular basis without properly cleaning them, it’s possible that these particles will find their way back into your hair. And that is really revolting!

You are likely well aware of the risk that is posed by the use of petroleum-based jelly components in a variety of hair products.

It is essential, if you want a healthy scalp, that you keep your hot combs in good condition and wash them on a regular basis. Unless you don’t mind having hair and scalp residue on your head, this won’t be a problem for you.

When you are through cleaning your hair, it is sufficient to merely scrape and wash the hot comb with soap and warm water at each and every session.

What You’ll Need

Because you already have everything in your home that you require for cleaning, this method will not cost you anything. It is sufficient to clean these implements with dish soap like Palmolive or shampoo like you would use to clean your hair. Aside from that, the procedure of cleaning can start after hot water, some time, and some time has passed.

 

1. Clear Away Any Accumulated Hair

If there is a significant amount of hair, you can begin by cleaning the hair from your heated combs. You should be able to remove them easily with your hands most of the time, but if there is still any hair trapped on your electric hot comb, you could try using a pen or, if it does not work, cut it with scissors. In most cases, you can remove them quickly with your hands. It will be much simpler to clean the comb once it has been submerged in water if there are less hairs adhering to it in the first place.

See also  How to Clean Dyson V8

2. Wash with warm water and soap.

You should wash your hot comb with water and soap if you are unable to remove all of the dirt or hair from it using the hot comb. This will undoubtedly eliminate any hair that may still be present on it.

  • Warm water should be poured into a sink until it is full.
  • Do not subject your tools to the high temperatures of boiling water, which can cause corrosion and severely reduce the amount of time they will last.
  • Soak your hot comb in a solution that consists of water, shampoo, and soap.
  • Allowing your pressing comb to soak in the mixture for 15 to 30 minutes will ensure that it is completely saturated with moisture.

Your metal comb will free itself of any residue left behind by hair products, even dirt.

3. Use An Old Toothbrush

Scrub your heated comb with a toothbrush to remove any remaining filth and any residue that may have been left behind. If your high-heat comb requires additional cleaning, you should continue to clean the bristles with a toothbrush. If you do this, you will be able to swiftly brush away any hair or debris, and you will also ensure that your heated brush is clean.

4. Scrub With Your Fingers

You could attempt scrubbing the hot comb with your fingers if you think it will be possible to do so. It may be more difficult to access the spaces in between, but exercising patience and continuing to clean as long as filth and hair are visible is the best course of action. The shampoo can then be removed from the hot comb by repeatedly rinsing it. This will eliminate any filth that is still on your hair.

5. Let It Dry

After you have rinsed your heated comb, you should pat it dry with a clean, dry towel. Be sure to get rid of any excess water in order to maintain the temperature of your cold comb by following these steps. On a paper towel, you can leave it out to dry for the night. This guarantees that it has been totally dried out and is prepared for the next use.

5 Things You Shouldn’t Do

  • Don’t skip regular cleaning once a month
  • Don’t soak a wooden brush
  • Don’t use high temperatures
  • Don’t forget to clean the handle
  • Don’t use alcohol for cleaning

Frequently Asked Questions

How do hairdressers keep their combs and brushes clean?

When cleaning combs, hairdressers typically use hot water and soap. Because of this, they can be certain that they have removed all of the available hair and grime from that area. Because they utilize a wide variety of styling products on their clients’ hair, and because some of those products always end up on the combs, this step is essential. Because of this, it is essential to ensure that the hair tools are thoroughly cleaned.

What Methods Are There for Removing Carbon From a Pressing Comb?

Baking soda can be used to clean a pressing comb if it has been contaminated with carbon. Baking soda, hot water, and a very small amount of dish soap like Palmolive should be mixed together and applied to the metal portion of your hair straightening or curling irons. This will remove any carbon buildup that may have occurred. After that, all that is left to do is rinse off the baking soda mixture and wait for a pressing comb to completely dry.

How exactly should I use vinegar to clean a hot comb?

Vinegar can be used to clean a heated comb by immersing the brush in a solution that is composed of equal parts warm water and white vinegar. After that, you need to use several miniature brushes to clean the bristles. After that, you should simply wash your hot comb with fresh water and then allow it to dry naturally. It is possible to clean hairbrush bristles thoroughly and without causing any damage by using a solution that contains vinegar.

Conclusion

As can be seen, cleaning the hot comb is simple if you have the appropriate supplies, and with practice, you will have greater expertise in the process. You are responsible for maintaining the health of your hair and taking the measures that are required to keep it looking gorgeous now that you know how to clean a hot comb. Utilize a heat protectant spray on your natural hair so that you may avoid the heat damage that can occur.

Similar Posts